Page 15 - e3511b

2.2.4 Motor Dimensions
M-PN2012KN201

M-PN3045KN001
M-PN4135KN001

M-PN4180KN001

1. For the dimensions marked ＊1, extra 3 [mm] margin is required due to their variations. Regards to inserting pin into rotor pinhole
2. ＊2 0.010 for highly accurate upper surface runout type (design serial number: 701) 6. Set tolerance of the inserting pin for clearance fit.
3. The bend radius of the motor cable lead (φ7) and the resolver cable lead (φ7) should be R30 [mm] or more. 7. Do not apply excessive load and/or impact to the motor when inserting the pin.
4. Do not use the leads of the motor cable and the resolver cable with flexing motion. 8. Use the pinhole as positioning purpose only.
5 .Do not add the stress (tension, vibration, etc.) to the joint of the leads and the connector. It causes the disconnection and
Do not use the pinhole to hold the load on rotor.
the loose connection.

14