Page 10 - e3328g
P. 10
5. Lubrication Specifications Fig. 8 Mounting position of lubrication accessories
(1) Mounting position of lubrication accessories Roller slide body Optional position
• T he standard position of grease fittings and tube End cap (on top of roller slide)
fittings is the end face of the roller slide. (Fig. 8) Standard position
A lubrication hole can be provided on the side or the (end face of roller slide)
top face of the end cap or roller slide. Mounting
positions are shown in the Figs. 8 and 9, and Tables Optional position
7.1 and 7.2. (side face of roller slide)
• For mounting on top of the face of end cap, an O ring
is required. For the model AN and BN, two O rings Optional position
as well as spacers are required. (side face of end cap)
• W hen using a piping unit with a thread of M6 × 1, a
connector is required to connect the piping unit to a Optional position
grease fitting mounting hole with M6 × 7.5. (on top of end cap)
Connectors are available from NSK.
Fig. 9 Top and side lubrication hole positions
(2) Cautions for oil lubrication
• If oil lubrication is used, the oil may not pervade the
rolling surface in accordance with the roller slide
mounting conditions such as upside down mounting and
wall mounting. In these situations, consult with NSK.
• W hen using an oil mist lubricating system, please
confirm how much oil is needed for each outlet port.
φ D1 S1 For models of AN and BN
roller slide:
Lubrication hole O ring + Spacer + O ring Lubrication hole
position on top position on side
For models of AL, BL, EM,
and GM roller slide:
O ring only S2
T2
T1
Table 7.1 Lubrication hole positions Unit: mm
Model No. Roller slide Grease s2 T1 Spacer D1 s1 T2
shape code nipple size
RA15 4 7 Necessory 8.2 4.4 4.2
RA20 AN, BN φ3 4
RA25 φ3 6 4 – 9.2 5.4 0.2
RA30 M6×0.75 5
RA35 M6×0.75 5.5 10 Necessory 10.2 6 4.5
RA45 M6×0.75 7.2
RA55 Rc 1⁄ 8 7.2 10 Necessory 10.2 6 3.5
RA65 Rc 1⁄ 8 7.2
Rc 1⁄ 8 15 Necessory 10.2 7 7.4
20 Necessory 10.2 7.2 10.4
21 Necessory 10.2 7.2 10.4
19 – 10.2 7.2 0.4
Table 7.2 Lubrication hole positions Unit: mm
Model No. Roller slide Grease s2 T1 D1 s1 T2
shape code nipple size
RA15 AL, BL, EM, GM 4 3 8.2 4.4 0.2
RA20 φ3 4 4 9.2 5.4 0.2
RA25 EM, GM φ3 6 6 10.2 6 0.4
RA30 M6×0.75 5 7 10.2 6 0.4
RA35 AL, BL, EM, GM M6×0.75 5.5 8 10.2 7 0.4
RA45 M6×0.75 7.2 10 10.2 7.2 0.4
RA55 EM, GM Rc 1⁄ 8 7.2 11 10.2 7.2 0.4
RA65 Rc 1⁄ 8 7.2 19 10.2 7.2 0.4
Rc 1⁄ 8
9